DC fan POLEA black timer 6 speed remote control headlight

Fan model POLEA without light, with DC motor 132 cm. in diameter, 37.2 cm. in height, with body in steel finished brown and black, with 4 wooden blades plywood reversible in brown-black.

It is operated by remote control and has 6 speeds, thanks to its DC motor, with power of 4-5-8-13-22-34, rpm 30-63-95-127-158-185, airflow 115,15 m3 min. To choose the height option you need, check the availability of accessory rods. It has inverter function (summer-winter)

W/SPEED 1: 5

W/SPEED 2: 7

W/SPEED 4: 14

W/SPEED 5: 20

W/SPEED 6: 33

RPM/SPEED 1: 86

RPM/SPEED 2: 102

RPM/SPEED 3: 119

RPM/SPEED 4: 131

RPM/SPEED 5: 151

RPM/SPEED 6: 167

Fans equipped with a DC motor provide us with more than 50% energy savings, in addition to a longer useful life, having 5 or 6 speeds the wear in each of them will always be less than a 3-speed fan.

In addition, the DC motor has greater speed control and greater speed in the changes of each of them.

This type of DC fan is very quiet and usually weighs less than AC fans.

This fan can be installed on sloped or thatched roofs, with a maximum slope of 15 degrees. If so, we will ensure that the fan accepts this type of mounting and that the blades of the fan do not touch the ceiling.

If you do not have enough space between the fan blades and the ceiling, you can choose a smaller fan or - depending on the model - attach an extension tube that is sold separately.

Ideally, place the fan in the center of the room. Blades shall maintain a safety distance of approximately 0,50 cm to any lateral obstacle and a minimum height distance of 2,10 cm from the ground.

The safety regulations must be taken into account. Roof fans are products belonging to electrical class I. Therefore, they must be grounded and are prohibited for use in the bathroom.

Usually when summer ends and we enter the cold winter, we all forget about the fan and it's left alone as a lamp or decorative object.

With this fan you won't have that problem, because it includes the inverter function or also in other words the winter/summer function.

By switching on the switch in winter the blades will turn in the opposite direction, thus forcing the hot air that accumulates in the ceiling of the room downwards, homogenizing the temperature and saving heating consumption, thus achieving a very comfortable feeling in the coldest and humidest months.

Another advantage of the inverse function is that we can ventilate the room without the breeze coming directly to us.

If you need more information about this product, do not hesitate to contact us and we will be happy to assist you.