DC fan PALK nickel remote control reverse function headlight

Model Palk fan with DC motor, 132 cm in diameter and 41 cm in height, six speeds adjustable by remote control included. Motor in matte nickel-finished steel, with four blades in maple-finished mdf wood and opal-glass diffuser.

Lighting by two E14 bulbs 40w max. not included (suitable for led bulbs). Extending rod available for higher height (consult).

DC engine with a power of 3-5-8-13-21-32, rpm 50-77-104-131-158-185, airflow 198,22 m3 min.

W/SPEED 1: 3

W/SPEED 2: 5

W/SPEED 4: 13

W/SPEED 5: 21

W/SPEED 6: 32

RPM/SPEED 1:50

RPM/SPEED 2: 77

RPM/SPEED 3: 104

RPM/SPEED 4: 131

RPM/SPEED 5: 158

RPM/SPEED 6: 185

Fans equipped with a DC motor provide us with more than 50% energy savings, in addition to a longer useful life, having 5 or 6 speeds the wear in each of them will always be less than a 3-speed fan.

In addition, the DC motor has greater speed control and greater speed in the changes of each of them.

This type of DC fan is very quiet and usually weighs less than AC fans.

This fan can be installed on sloped or thatched roofs, with a maximum slope of 15 degrees. If so, we will ensure that the fan accepts this type of mounting and that the blades of the fan do not touch the ceiling.

If you do not have enough space between the fan blades and the ceiling, you can choose a smaller fan or - depending on the model - attach an extension tube that is sold separately.

Ideally, place the fan in the center of the room. Blades shall maintain a safety distance of approximately 0,50 cm to any lateral obstacle and a minimum height distance of 2,10 cm from the ground.

The safety regulations must be taken into account. Roof fans are products belonging to electrical class I. Therefore, they must be grounded and are prohibited for use in the bathroom.

Usually when summer ends and we enter the cold winter, we all forget about the fan and it's left alone as a lamp or decorative object.

With this fan you won't have that problem, because it includes the inverter function or also in other words the winter/summer function.

By switching on the switch in winter the blades will turn in the opposite direction, thus forcing the hot air that accumulates in the ceiling of the room downwards, homogenizing the temperature and saving heating consumption, thus achieving a very comfortable feeling in the coldest and humidest months.

Another advantage of the inverse function is that we can ventilate the room without the breeze coming directly to us.

If you need more information about this product, do not hesitate to contact us and we will be happy to assist you.