AC fan PANAY nickel reversible blades remote control headlight

Roof fan with light model Panay, 120 cm. in diameter and 30 cm. in height, with motor made of matte nickel finished steel, opal glass diffuser and three MDF wooden blades. The finish of the blades is nickel mate and reversible mahogany.

In this case the ceiling fan will perform the lighting and ventilation functions at a single fixing point.

Lighting for 2 bulbs E14 max. 40W not included (suitable for LED bulbs), and remote controlled included.

It has three adjustable speeds. Type of AC engine with fan power W: 14-30-58NA RPM: 95-150-200.

W/SPEED 1: 14

W/SPEED 2: 30

RPM/SPEED 1: 95

RPM/SPEED 2: 150

RPM/SPEED 3: 200

This fan can be installed on sloped or thatched roofs, with a maximum slope of 15 degrees. If so, we will ensure that the fan accepts this type of mounting and that the blades of the fan do not touch the ceiling.

If you do not have enough space between the fan blades and the ceiling, you can choose a smaller fan or - depending on the model - attach an extension tube that is sold separately.

Ideally, place the fan in the center of the room. Blades shall maintain a safety distance of approximately 0,50 cm to any lateral obstacle and a minimum height distance of 2,10 cm from the ground.

The safety regulations must be taken into account. Roof fans are products belonging to electrical class I. Therefore, they must be grounded and are prohibited for use in the bathroom.

Usually when summer ends and we enter the cold winter, we all forget about the fan and it's left alone as a lamp or decorative object.

If you need more information about this product, do not hesitate to contact us and we will be happy to assist you.