SIROS DC fan white reverse function timer remote control FARO

SIROS lightless fan with DC motor, and with a diameter of 132 cm and 25 cm. high, with white-finished steel body and 3 white-finished ABS blades.

It is operated by remote control and has 5 speeds, thanks to its DC motor that guarantees minimal noise and maximum efficiency, with a power of 6-12-19-25-38 w, and 85-108-12e9-150-180 RPM. It has an inverter function (summer-winter). This fan model is suitable for rooms 15-25 meters.

W/SPEED 1: 6

W/SPEED 2: 9

W/SPEED 4: 22

W/SPEED 5: 29

W/SPEED 6: 37

RPM/SPEED 1: 85

RPM/SPEED 2: 105

RPM/SPEED 3: 132

RPM/SPEED 4: 150

RPM/SPEED 5: 170

RPM/SPEED 6: 180

Fans equipped with a DC motor provide us with more than 50% energy savings, in addition to a longer useful life, having 5 or 6 speeds the wear in each of them will always be less than a 3-speed fan.

In addition, the DC motor has greater speed control and greater speed in the changes of each of them.

This type of DC fan is very quiet and usually weighs less than AC fans.

This fan can be installed on sloped or thatched roofs, with a maximum slope of 15 degrees. If so, we will ensure that the fan accepts this type of mounting and that the blades of the fan do not touch the ceiling.

If you do not have enough space between the fan blades and the ceiling, you can choose a smaller fan or - depending on the model - attach an extension tube that is sold separately.

Ideally, place the fan in the center of the room. Blades shall maintain a safety distance of approximately 0,50 cm to any lateral obstacle and a minimum height distance of 2,10 cm from the ground.

The safety regulations must be taken into account. Roof fans are products belonging to electrical class I. Therefore, they must be grounded and are prohibited for use in the bathroom.

Usually when summer ends and we enter the cold winter, we all forget about the fan and it's left alone as a lamp or decorative object.

With this fan you won't have that problem, because it includes the inverter function or also in other words the winter/summer function.

By switching on the switch in winter the blades will turn in the opposite direction, thus forcing the hot air that accumulates in the ceiling of the room downwards, homogenizing the temperature and saving heating consumption, thus achieving a very comfortable feeling in the coldest and humidest months.

Another advantage of the inverse function is that we can ventilate the room without the breeze coming directly to us.

If you need more information about this product, do not hesitate to contact us and we will be happy to assist you.