DC LESTE nickel fan has no light two blades with Fabrilamp timer

Lightless ceiling fan model LESTE in nickel color satin with two handles in finished wood beech. It is equipped with DC engine and five speeds. Measures 32 cm high and 132 cm diameter.

The Marin fan has a consumption of 5 W 7 W 10 W 18 W 36 W for each of its 5 speeds

RPM 98 rpm 120 rpm 138 rpm 172 rpm 212 rpm

Air flow 2000 m3 2500 m3 3000 m3 3500 m3 4000 m3

Sound level 22 dB 26 dB 30 dB 35 dB 40 d

Includes remote control with timer for 1-4-8 hours.

The DC-powered fans provide us with more than 50% energy savings, in addition to a greater life of use, with 5 or 6 speeds the wear on each one will always be less than a 3-speed fan.

In addition, the DC engine has greater control of the speed and faster changes in each of them.

This type of DC fans are very silent and their weight is usually lower than AC fans.

It has 5 ventilation modes, and all functions are operated by remote control that you have included.

This fan can be installed on tilted or dull ceilings, with a maximum slope of 15 degrees of inclination. If so, we will make sure that the fan accepts this type of assembly and that the fan blades do not touch the ceiling.

In case you don't have enough space between fan and ceiling blades, you can choose a smaller fan or - according to the model - couple an extension tube.

The Marin fan includes two 15.5 and 25 cm tiles to choose the height that interests us most.

The ideal thing is to place the fan in the center of the room. The blades must maintain a safety distance of about 0.50 cm to any lateral obstacle and a distance at a minimum height of 2.10 centimeters of the floor.

Security regulations must be taken into account. The ceiling fans are products that belong to class I. Therefore, they must be connected to the ground and are prohibited for use in the bathroom.

Normally when the summer ends and we enter the cold winter, we all forget the fan and it is only like a lamp or a decorative object.

With this fan you will not have that problem, because it includes the function inverter or also said otherwise winter/summer function.

VERANO Mode: The downward airflow creates a wind cooling effect for greater energy saving.

INVIERNO mode: The upward flow of air recycles the increase of hot air for greater energy savings.

Accessing the switch in winter the blades will rotate in the opposite direction, so force the hot air that accumulates on the ceiling of the room downwards, homogenizing the temperature and saving the consumption in heating, so we get a very comfortable feeling in the months of colder and humidity.